Home have lathe walls. Were in that any specific "rules" of thumb when working on them?
I've avoided doing anything to these walls for fear they will crumble, I won't find a stud, or something else I don't even know about. Any agreeable hints are appreciated.
Answers:
Well obviously it is an OLDER home. If it is around 100 years or more the studs could be as far as 4 feet apart (if it's not a supporting wall, otherwise they could be up to 20 " apart). I own been in these types of homes forever, and it is a chore to work near lathe and plaster walls, but if you are patient and take your time you can do anything you want merely remember DRILL first Source(s): Renovating a 154 year old house now. Some of my outside wall studs are 10" on center and some are 27" on center. Gotta love these outmoded houses.
There are studs, approx 16 inches apart. You can find them with a stud finder (buy at Home Depot, etc), or simply tap on the walls to locate. Wall will nouns hollow when tapped -- stud will sound solid when compared to wall.
Yes, lathe and plaster walls can be easier said than done to work with, but many society do. Lots of folks should be able to help here. I individually use a drill to start my hole (drilling into the plaster and stud), then drive the nail for the picture hanger, etc., into this hole. Don't try to screw or staple anything directly into the plaster -- drill first.
Plaster can also be patched, like sheet rock, should you create a large hole contained by the plaster. Finally, crumbling is normal with lathe and plaster. Source(s): lots of trial and error, and research
Related Questions:
![For lathe contraption? Can someone recount me what is this for [with picture]?](../machinery-image/lathe-238.jpg)
I involve to know how to install a clean belt on a model 200 lathe made by logan? It is a flat belt .?
Can someone trade name a gun near merely a mill and lathe?
What is the difference between a contrivance center and a lathe?
Working of a head screw surrounded by a lathe?
What is the difference between CNC Lathe and CNC milling apparatus?
Answers:
Well obviously it is an OLDER home. If it is around 100 years or more the studs could be as far as 4 feet apart (if it's not a supporting wall, otherwise they could be up to 20 " apart). I own been in these types of homes forever, and it is a chore to work near lathe and plaster walls, but if you are patient and take your time you can do anything you want merely remember DRILL first Source(s): Renovating a 154 year old house now. Some of my outside wall studs are 10" on center and some are 27" on center. Gotta love these outmoded houses.
There are studs, approx 16 inches apart. You can find them with a stud finder (buy at Home Depot, etc), or simply tap on the walls to locate. Wall will nouns hollow when tapped -- stud will sound solid when compared to wall.
Yes, lathe and plaster walls can be easier said than done to work with, but many society do. Lots of folks should be able to help here. I individually use a drill to start my hole (drilling into the plaster and stud), then drive the nail for the picture hanger, etc., into this hole. Don't try to screw or staple anything directly into the plaster -- drill first.
Plaster can also be patched, like sheet rock, should you create a large hole contained by the plaster. Finally, crumbling is normal with lathe and plaster. Source(s): lots of trial and error, and research
Related Questions: